How to Die Cut Sloth Shapes:

Apply fusible web product to the wrong side of the fabric, following the manufacturer’s instructions, before cutting for fusible appliqué

• Head: Cut and fuse one 3 1/2" x 4" rectangle. Place on selected blade and cut. Cut 10 heads across the width of fabric. One yard of 40" wide fabric cuts 100 heads.
• Face: Cut and fuse one 3 1/2" x 2 1/2" rectangle. Place on selected blade and cut. Cut 16 faces across the width of fabric. One yard of 40" wide fabric cuts 160 faces.
• Body: Cut and fuse one 4" x 5 1/2" rectangle. Place on selected blade and cut. Cut 7 bodies across the width of fabric. One yard of 40" wide fabric cuts 63 bodies.
• Arm: Cut and fuse one 1 3/4" x 3" rectangle. Place on selected blade and cut. Cut 13 arms across the width of fabric. One yard of 40" wide fabric cuts 260 arms. Note: To cut a pair of arms, cut one 3" x 3 1/2" rectangle. Fanfold and cut.
• Other small shapes: Place scraps on blade and cut.

Why Quilters Love the GO! Sloth Die:

• Perfect for home décor, wall hangings, quilts and other ‘sloth’-themed projects. You can also put together themed kitchen or gift sets by making oven mitts, aprons, placemats, table runners and more.
  
• No template required! The GO! Sloth die includes 9 applique shapes that are difficult to cut by hand.
• GO! Sloth coordinates with GO! Square-9½" (9" Finished) (55591), GO! Qube 9" (55777), GO! Setting Triangles-9" Finished (55552), GO! Oven Mitt (55563), plus the GO! Stems &  Leaves (55331) applique die.
  
• Quickly and easily cut four of each pre-fused applique shape in one pass thru the cutter (fusible counts as one half layer of fabric).
  
• Cut Sloth shapes out of a variety of fabrics: cotton, batiks, wool, felt, flannel, fleece, Cuddle® fabrics and more!
  
• Great way to use up scraps.
  
• Includes free embroidery download with 3 stitches ($22 value).
  
• Free pattern downloads available to get you started.
  
• Charm Square-friendly

AccuQuilt Benefits: 

• Cut so much more fabric in less time. 
• Get accurate cuts every time -- No slipping rulers or mistakes
• Easiest to use -- Simply place die on cutter, then fabric and cutting mat on top
• Save fabric with Two Tone Foam -- Get more out of your fabric by placing it only over the shape you want to cut. 
• Safe to use -- No blades come anywhere near your fingers

Die Tips: 

• With some fabrics, after cutting, a thread or two will remain where die blades meet. Snip threads with scissors. 
• Blades on some dies are positioned at an angle.  Align fabric to edge of shape, not edge of die board. 
• Use good quality fabric to reduce fabric stretch. 
• It's always a good idea to test cut one shape before cutting many shapes to ensure fabric orientation is correct.